3
Application Tips:
Following is the correct cable connection when use STP cable:
1. STP (shielding twisted pair) Cable.
2. STP (shielding) RJ45 connector with STP cable connection.
If your RJ45 connector is plastic housing (unshielded), then the cable connection
must do the following:
1.
The ground cable must pull out around 5-10cm length to connect with VGA Extender’s ground
screw for grounding.
2.
Make the ground cable connect to ground screw, then plug RJ45 connector.
Troubleshooting:
1. Check all the connections and verify the pin of configuration.
2. The maximum distances supported by the VGA Extender are dependent on the type of twisted pair
cable and image resolution of the PC’s VGA interface. Make sure that the maximum recommended
operational distances have not been exceeded.
3. All wiring is “straight-through” twisted pair cable, not being used for other LAN or telephone equipment.
4. Do not connect the VGA Extender to a telecommunication outlet wired to unrelated equipment.
5.
Replace the VGA Extender with another one that is knows to be working.
