Jaycar LA5214, Руководство пользователя

Страница: 5 / 7

5
1
1 1
1
J
P
SW2
U1
T1
SW1
SP1
BATT
}
How to operat
e
Use the slide switch to select
HOME
,
OFF
, and
OUT
mode.
At
HOME
mode, the alarm will sound immediately when the door is opened.
At
OUT
mode, when the door is opened, there is a 20 seconds delay before the alarm sounds.
The user may enter the PIN within the delay time to avoid the alarm being activated. (There is
a short Beep to indicate the exit delay is over and the system is armed)
At
OFF
mode, an entry chime (2 “Ding-Dong”) will sound when the door is opened.
The user may disable this Chime function by pulling out the “JUMPER”. (As shown on the
PCB diagram) (Factory default setting is with the “Chime” on)
A) Turn on Alarm System while Exiting the Shed
1) Push the slide switch to “ OUT ” position.
2) Close the door and leave the shed within 20 seconds.
B) Switch off Alarm System when Entering the Shed
1) Enter your own four-digit PIN number within 20 seconds. (Note: The factory preset PIN no. is “ 1 2 3 4 ”. To
change the PIN, please see procedure “ 4 ”)
2) Push the slide switch to “ OFF ” position.
C) When Inside the Shed
1) Push the slide switch to “ HOME ” position.
2) Magnetic Switch is activated to protect your shed
Red LED
Numbers
Slide Switch
HOME HOME HOME HOME OUT OUT OUT OUT
OFF OFF OFF OFF
2
2 2
2
3 3 3 3 4 4 4 4
HOME
HOME HOME
HOME
OFF OFF OFF OFF
OUT OUT OUT OUT
OFF OFF OFF OFF
HOME HOME HOME HOME OUT OUT OUT OUT
Jumper Jumper Jumper Jumper