Electric Skateboard
7
PREPARATION
1. Make sure that the skateboard power switch in off
state.
2. Put the switch of “slow/fast” model to “slow”
mode on the handle.
3. Ensure the remote control was fully charged.
4. The Skateboard should be fully charged before
first use.
5. when the handle can’t use or invalid, click on
“Reset” to make it work(ensure the remote control
has power)
POWER INDICATOR
The remote control is build-in Li-polymer battery,
when it’s low power the green light on the remote
turns red, you should turn off the skateboard and
charge the remote control.
Please stop use the remote control when it’s low
charge.
