4
Connect and Operate
1.
Connect the signal source such as Blu-ray players, Gaming consoles, Pay TVs, cable or satellite
receivers and computers that have a HDMI output with a short HDMI cable no longer than 5m to
the HDMI socket on the transmitter unit.
2.
Connect the transmitter to the receiver by using a single Cat5E or Cat6 UTP (
Unshielded Twisted
Pair)
cable that is terminated with an RJ45 plug. It is strongly recommended to use Cat6 cable to
achieve 50m.
3.
Connect the HDMI output socket from the receiver to the HDMI input socket of any
high-definition display devices such as LCD, DLP or HD projectors with a short HDMI cable, no
longer than 5m.
4.
Plug in the IR receiver into the RX socket/port on the Receiver. Have the IR emitter plugged into
TX socket/port the transmitter and point it towards the signal source (Blu-ray player, Gaming
consoles, and Pay TV boxes etc). Please refer to page 6 for set up.
