Jaycar Electronics MP5212, Руководство пользователя

Страница: 19 / 31

Rack mount Series UPS
(
1~3kVA
)
User ‘s Manual
-15-
Battery cabinet installation and battery cabinet cable connections
please refer to the installation manual.
Step 3. For the long backup type UPS, the battery connecting line could be
connected with UPS only after the UPS with mains input
Picture shows only one of four modes of communication interface.
2kVA & 3kVA wires connection as Figure 3-3 showed
：
INPUT
DC
FUSE
250V/15A
N
AC INPUT
L PE AC OUTPUT 10A Max.
L N PE
DC DC
OFF ON
GND
RS232
1.Take
off cover
3. DC
Source
2.DC
Input
Socket output
to load
Socket output to load
Socket output to load
Socket output
to load
Share
alike
!
Share
alike
!
220V AC Power System
Connecting to the rack
Communite with
computers or moniters
Figure 3-3 2kVA & 3kVA wire connection
Cautions:
Step 1. Mains socket should be installed near the equipment and should be
easy to touch.
Step 2. For long backup type UPS, it needs to connect battery input wire, that’s
to connect the the battery cable to the rear panel socket of UPS. The
Battery cabinet installation and battery cabinet cable connections
please refer to the installation manual.
Step 3. For the long backup type UPS, the battery connecting line could be
connected with UPS only after the UPS with mains input
Note:
Picture shows only one of four modes of communication interface, the
customer can choose other communication interfaces when place order.
3.5.2 Inspection of Electric Connection
1 ． Inspection of AC input wire: Whether the AC wire color spectrum is