Jaybird Tarah, Руководство пользователя

Страница: 22 / 25

19
TROUBLESHOOTING
Soft reset: If your earbuds are not responding, put your Tarah in the charger cradle and connect the USB charging cradle to a
power source. This will turn your earbuds off and perform a soft reset.
Factory reset: If this does not resolve your problem we recommend resetting your earbuds to their original factory settings.
Before starting this process please “FORGET” or “REMOVE” your Tarah device in your Bluetooth list of discovered devices in
your audio device.
1 2 3
Put your earbuds
in to pairing mode.
Press and hold the
Middle Button
until
the earbuds turn off.
Then press and hold
the Middle Button
for 5 seconds until
the
white LED
starts
blinking.
While the white LED
is blinking press the
Middle Button
twice.
The
red LED
illuminates briefly, and
then the
white LED
starts blinking again.
Now your earbuds are
reset and ready to pair.
Go to your audio device’s
Bluetooth menu and select
Tarah to re-pair.