4. The LED indicator on the right earpiece will glow
RED during the charge cycle (about 2 hours to
fully charge). The LED will turn OFF when fully
charged.
5. Remove headset from Charger Dock.
Note: When the battery needs to be recharged, the LED
indicator will alternate blue and red color every 5 seconds.
Wearing the JayBird Bluetooth® Stereo Headset
Getting your JayBird headset on for the first time maybe challenging but stick
with it, you will get the hang of it after a couple of times. The JayBird headset is
designed and built for performance fit under any circumstance so it’s like putting
on tight fitting performance clothing.
Instructions for first use:
1. Stand in front of a mirror
2. Make sure the left side ear bung is rotated to the default 2 o’clock position
and the right side ear bung is rotated to the default 10 o’clock position (as
shown in figure 7)
3. SLIGHTLY pull the earpiece open
4. Applying your thumb behind your ear, guide your ear through the hole the
headset makes, making sure your hair is out of the way
5. Move the speaker into place snug into your
ear canal
6. While grasping the top of your ear with your
fingers, pull the head set down to fit
7. Adjust the headset and speaker into the
most comfortable position
8. Take other earpiece around the back of your
head making sure that the behind-the-head
wire is under your hair and sits against your
neck below your hairline.
9. Repeat steps 1 through 5 for the other ear.
phone ring through the speakers on your JayBird Bluetooth® Stereo
Headset. The sensitive microphone on the JayBird Bluetooth® Stereo
Headset will pick up your voice when you talk during your phone call. To
terminate the call, either press the Power/Talk button on the JayBird headset,
use your cell phone dial pad button, or wait for the other party to terminate
the call on their end. You can also terminate the call on your cell phone by
pressing the end call button on your cell phone dial pad. Refer to your cell
phone user manual on how to make and end calls using a wireless headset.
2. When a call comes in to your cell phone, you will hear an ascending ring
through the JayBird Bluetooth® Stereo Headset speakers. Your cell phone
will also ring and/or vibrate (unless you have the ringer and/or vibrate mode
turned off). Answer the call by pressing the Power/Talk button on the right
hand earpiece. You can also answer the call using your cell phone dial
pad button. To terminate the call, either press the Power/Talk button on the
JayBird headset, use your cell phone dial pad button, or wait for the other
party to terminate the call on their end. Refer to your cell phone user manual
on how to answer incoming calls using a wireless headset
Note: You can make and receive calls even when listening to stereo music. The music will be
paused during your phone call and will resume upon call termination..
Using your JayBird Bluetooth® Stereo Headset with
an iPod® or other MP3 players.
You can listen to music from any supported Apple iPod® or other MP3 players
using the appropriate JayBird Bluetooth® Adapter.
Apple iPod®
The optional JayBird Bluetooth® Adapter for iPod® (Model number JB-BA-100i)
connects directly to the iPod® 30 pin dock connector is compatible with the
following Apple iPod® models:
•
iPod Nano
•
iPod with video (5G)
•
iPod mini
•
iPod (4G, photo)
The JayBird Bluetooth® Adapter for iPod® draws its
power directly from the iPod® so no battery or charging
is required.
3
6
CHARGE STATUS INDICATOR
Optional Bluetooth® adapter and iPod®
shown above are sold separately.
