24
Trouble Shooting
Problems
Possible solution
No power/not charging
1. Check if the power plug is correctly connected with the power socket.
2. Check if the power switch is on.
Disk cannot be read
1. Check if the power switch is on.
2. Check if the disc is being inserted; the disc side with label should be faced
up.
3. Check if the disc is being placed upside down.
4. Please change or clean the disc if it is damaged or dirty.
5. If the player is contaminated with damp, take out the disc and switch the
power on for 1 to 2 hours.
6. The area code of the disc is different from that of the player.
7. The disc is not in a correct format.
No image
1. Make sure that TV is switching on and connected with the player in AV
mode.
2. Check whether the video output setting of the
VIDEO SETUP
in the menu
setup is correct or not.
3. Check whether the connection cable is good.
4. Clean the disc.
5. Make sure that the screen switch is popped up, i.e. it is not pressed down.
Image
blurring/distortion
1. It indicates that the disc is damaged or dirty.
2. Reset of the output system of TV or DVD player.
Bad disc label appears
It indicates that the disc is damaged or dirty; please change or clean the disc.
Images cannot be
displayed totally
Reset the TV system.
Select a corresponding screen format from the setup menu of the DVD disc.
Remote control does
not work
1. Check whether there is obstacle that is blocked between the remote control
and the player.
2. Check whether the remote control is pointed to the sensor of the player.
3. Check whether the batteries of the remote control are correctly connected.
4. Check whether the batteries are in good condition.
No sound, or audio
output is incomplete
1. Make sure that TV and amplifier are switching on and with correct settings.
2. Check if there is a system connection shield for TV and amplifier.
3. Check if the system is in mute mode.
4. Press
[Audio Channel]
or
[Language]
.
5. It shall output silently in following modes: Pause/Single Step/
Slow Forward/Slow Reverse/Fast Forward/Fast Reverse etc.
6. Output volume of TV is too low.
