Jay-tech 48447, Руководство пользователя

Страница: 9 / 15

WK-6221S
FR/2103.V01
FR 7
Reversing switch action
This tool has a reversing switch to change the direction of rotation. Depress the reversing switch lever
from the A side for clockwise rotation or from the B side for counterclockwise rotation.
When the reversing switch lever is in the neutral position, the switch trigger cannot be pulled.
CAUTION:

Always check the direction of rotation before operation.

Use the reversing switch only after the tool comes to a complete stop. Changing the direction of
rotation before the tool stops may damage the tool.

When not operating the tool, always set the reversing switch lever to the neutral position.
Speed change
To change the speed, first switch off the tool and then slide the speed change lever to the "2" side for
high speed or "1" side for low speed. Be sure that the speed change lever is set to the correct
position before operation. Use the right speed for your job.
CAUTION:

Always set the speed change lever fully to the correct position. If you operate the tool with the
speed change lever positioned halfway between the "1" side and "2" side, the tool may be
damaged.

Do not use the speed change lever while the tool is running. The tool may be damaged.
1. Reversing switch lever
1. Speed change lever