AAA-055-00187
55
5000 SERIES HD TRAILER OWNER MANUAL
Figure 32 - Grease Points on Twin Auger Mixer
* - Indicates central grease location for gearboxes and walking beam hinge pins
Note – There are a total of 6 bearings on the conveyor that need to be greased. The 3 not
labeled are directly opposite the ones that are
Figure 33 - Central Grease Decal
(Location Labeled in Figure 32)
From left to right:
1. Left Side Walking Beam Hinge Pin
2. Right Side Walking Beam Hinge Pin
3. Front Planetary Reducer Gearbox
4. Rear Planetary Reducer Gearbox
* - Gearbox should be greased 1 pump every 8 hours or 25 loads
