AAA-055-00187
26
16
CONTROLS
Weighing
16.1.1 Scale System Overview
•
The scale system on all HD models includes five weigh-bars. The axle system incorporates four
weigh-bars while the tongue and hitch system incorporates the fifth. The weigh-bars electronically
measure the amount of ration inside the mixing chamber. The indicator is mounted at the front of
the mixer, in a position high enough to be seen clearly from the tractor cab.
16.1.2 Indicator Mounting and Adjustment
•
There are various scale indicators available for use on your Jaylor however the mounting assembly
for most scale indicators is the same. When attaching the indicator to the machine, be sure that it
is securely fastened. Typically, the indicator slides down into the mounting bracket, and a wire or
plastic fastener secures the indicator to the mounting bracket.
•
To adjust the direction that the indicator faces, see
Figure 13
:
Figure 13 - Scale Indicator Adjustment
1. Swivel Joints –
Swivel joint lock nuts should be
tight enough to hold the indicator in position while
allowing it to be re-positioned by hand. The
indicator can be rotated to face any direction.
2. Scale Indicator
