JAY
•
LOR
®
Operator’s Manual
- 12 -
Trailer Units - Model 3350
SAFETY SIGNS
•
Keep safety signs clean and legible at all times.
•
Replace safety signs that are missing or have become illegible.
•
Replaced parts that displayed a safety sign should also display a safety sign.
•
Safety signs are available from your dealer, distributor, or the factory.
How to Install Safety Signs:
•
Be sure that the installation area is clean and dry.
•
Be sure temperature is above 50°F (10°C).
•
Decide on the exact position before you remove the backing paper.
•
Remove the smallest portion of the split backing paper.
•
Align the sign over the specified area and carefully press the small portion with the
exposed sticky backing in place.
•
Slowly peel back the remaining paper and carefully smooth the remaining portion of the
sign in place.
•
Small air pockets can be pierced with a pin and smoothed out using the piece of sign
backing paper.
SIGN-OFF FORM
JAY
•
LOR
®
Fabricating Inc. follows the general Safety Standards specified by the American
Society of Agricultural Engineers (ASAE) and the Occupational Safety and Health
Administration (OSHA). Anyone who will be operating and/or maintaining the machine must
read and clearly understand ALL Safety, Operating, and Maintenance information presented
in this manual.
Do not operate or allow anyone else to operate this equipment until such information has
been reviewed. Annually review this information with personnel.
Make these periodic reviews of SAFETY and OPERATION a standard practice for all of your
equipment. We feel that an untrained operator is unqualified to operate this machine.
A sign-off sheet is provided for your record keeping to show that all personnel who will be
working with the equipment have read and understand the information in the Operator’s
Manual and have been instructed in the operation of the equipment.
