JAY
•
LOR
®
Operator’s Manual
- 23 -
Trailer Units - Model 3300
CONTROLS
Weighing
The scale system on standard
models includes (3) weighbars.
The axle system incorporates two
weighbars while the tongue and
hitch system incorporates the third
weighbar. The weighbars
electronically measure the amount
of ration inside of the mixing
chamber.
There are various scale indicators
available for use on your
JAY
•
LOR
®
Cutter-Mixer-Feeder.
The mounting assembly for most
Weigh-tronix
®
Scale Indicators is
the same. When attaching the
indicator to the machine, be sure
that it is securely fastened.
Typically, the indicator slides down
into the mounting bracket, and it is
also necessary to use a wire or
plastic fastener to secure the
indicator to the mounting bracket.
For more information on mounting,
refer to the Weigh-tronix
®
manual
included in this binder.
Most scale options configured in trailer applications use a single scale indicator. The scale
indicator is located on the front side of the upper machine frame. The mounting bracket arm
assembly allows the scale indicator to be turned to face every direction.
Note: Once the desired position of the scale indicator is set, ensure that the mounting
bracket arm assembly nuts are tightened firmly to secure the bracket to the
machine.
Figure 5 - 3-point Scale System
Tongue Bar and Axle System Bars.
