7
Replacing the battery: remove the cover on the back of the
bite alarm, and insert 1 R9/6LR61 9V battery (not included).
Mount the alarm on a buzzer bar or bankstick.
Turn the Switch ON/OFF to activate the alarm. Beep and
flashing lights confirms, that bite indicator is ready to work.
Thread the fishing Line over the sensor. A bite is indicated
by sound and flashing left light for 20 seconds allowing you
to identify the bite indicator, which has been activated.
The Volume can be adjusted via the volume control (V),
sensitivity via Sensitivity control (S) and the tone via tone
control (T).
Press (L) button to switch on/off dusk LED.
Turn off the bite alarm by press Switch ON/OFF. Beep and
single flash D LED – left light confirm the bite alarm is off.
The maximum distance of transmission to the wireless
transmitter is between 100 -150 meters depending on
conditions.
Replacing the battery: remove the cover on the back of the
receiver, and insert 4 AAA/R03 1,5V battery (not included).
Turn (T) control to switch on bite alarm. Bite is indicated by
sound alarm and flashing LED on Receiver the same color
as bite alarm. The Volume can be adjusted via the volume
control (V) and the tone via tone control (T).
Turn (V) control to choose vibes or volume alarm.
Turn off the receiver by (T) control anticlockwise until it
clicks.
RECEIVER
BITE INDICATOR
