Precaution
Please note that the output of this unit would be larger than typical DAC. So, it is
recommended to lower the volume (#8 on the front panel) and adjust the volume after
playing.
Also, when output is being fixed as balanced or unbalanced, the volume is set at the
maximum level. Please operate the device after adjusting the volume of amplifier or active
speakers appropriately.
1.
Connecting to PC
-
Using the adaptor provided, connect to the socket on the back panel (#8 on the back).
And, using USB (A to B) cable, connect PC and the device to #7 on the back panel.
-
Connect output to #1,2 on the back or #4,6 on the front.
-
Turn on the power of PC & the device and visit
firmware (for Windows).
-
Select INPUT of the front panel (#1 on the front) as USB and put select switch (#2 on
the front) to PC
-
If using Balanced or Unbalanced, put OUTPUT select switch to
. If using headphones
(#4 on the front) or earphones (#6 on the front), put the OUTPUT switch to 7
.
(Waring: Analogue on the back and headphones on the front do not simultaneously output)
Set the volume knob (#8 on the front) to the minimum, then adjust the volume once music
is played.
(Warning: Adjusting volume is only available on headphones, earphones and Unbalanced
Var)
Volume on the PC: Set this device as a standard device.
Operate desired player and play (Settings are various depends on the players).
F
or Foobar2000 and Jriver, please refer to user manual from the manufacturer’s website
