12
Loading Ribbon Cartridge
This printer requires approved ribbon cartridges (see appendix D). The resin thermal
transfer and dye sublimation ribbons are specifically designed for your printer.
Note:
i series printers require the use of i series ribbons for full colour printing..
When the ribbon is completely used, change the whole cartridge assembly.
Each ribbon cartridge includes an adhesive cleaning roller that cleans the card as it enters
the printer.
1.
Place the printer power switch in the OFF (0) position.
Electrostatic discharge caution
:
DO NOT TOUCH the printhead or the electronic
components on the printhead.
Discharge of electrostatic charge from the
human body or other surfaces can damage
the printhead or other electronic components
2.
Open printer lid by pressing the cover
release button on the top of your printer.
3.
Peel off protective wrapper by gently pulling
on the tape.
4.
Insert the ribbon cartridge with the
cleaning roller facing down, so the gears on the
ends of the rollers fit into the appropriate slots.
When the ribbon is exhausted, replace the whole cartridge.
RIBBON CARTRIDGE
CLEANING
ROLLER
