Javad TRIUMPH-VS Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 96

background image

5

www.javad.com

P

REFACE

Thank you for purchasing this product. The materials available in this Manual (the “Manual”) have been prepared
by JAVAD GNSS, Inc. (“JAVAD GNSS”) for owners of JAVAD GNSS products. It is designed to assist owners
with the use of TRIUMPH -VS and its use is subject to these terms and conditions (the “Terms and Conditions”).

Note:

Please read these Terms and Conditions carefully.

Terms and Conditions

USE –

JAVAD GNSS receivers are designed to be used by a professional. The user is expected to have a good

knowledge and understanding of the user and safety instructions before operating, inspecting or adjusting.
Always wear the required protectors (safety shoes, helmet, etc.) when operating the receiver.

COPYRIGHT –

All information contained in this Manual is the intellectual property of, and copyrighted

material of JAVAD GNSS. All rights are reserved. You may not use, access, copy, store, display, create
derivative works of, sell, modify, publish, distribute, or allow any third party access to, any graphics, content,
information or data in this Manual without JAVAD GNSS’ express written consent and may only use such
information for the care and operation of your TRIUMPH -VS. The information and data in this Manual are a
valuable asset of JAVAD GNSS and are developed by the expenditure of considerable work, time and money,
and are the result of original selection, coordination and arrangement by JAVAD GNSS.

TRADEMARKS –

TRIUMPH-VS™, JAVAD GNSS

®

are trademarks or registered trademarks of JAVAD

GNSS. Windows

®

is a registered trademark of Microsoft Corporation; Bluetooth

®

word mark is owned by the

Bluetooth SIG, Inc. Product and company names mentioned herein may be trademarks of their respective owners.

DISCLAIMER OF WARRANTY –

EXCEPT FOR ANY WARRANTIES IN THIS MANUAL OR A

WARRANTY CARD ACCOMPANYING THE PRODUCT, THIS MANUAL AND THE TRIUMPH -VS
RECEIVER ARE PROVIDED “AS-IS.” THERE ARE NO OTHER WARRANTIES. JAVAD GNSS
DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR USE OR PURPOSE. JAVAD GNSS AND ITS DISTRIBUTORS SHALL NOT BE LIABLE
FOR TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN; NOR FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING,
PERFORMANCE OR USE OF THIS MATERIAL OR THE TRIUMPH -VS RECEIVER. SUCH
DISCLAIMED DAMAGES INCLUDE BUT ARE NOT LIMITED TO LOSS OF TIME, LOSS OR
DESTRUCTION OF DATA, LOSS OF PROFIT, SAVINGS OR REVENUE, OR LOSS OF THE
PRODUCT'S USE. IN ADDITION, JAVAD GNSS IS NOT RESPONSIBLE OR LIABLE FOR DAMAGES
OR COSTS INCURRED IN CONNECTION WITH OBTAINING SUBSTITUTE PRODUCTS OR
SOFTWARE, CLAIMS BY OTHERS, INCONVENIENCE, OR ANY OTHER COSTS. IN ANY EVENT,
JAVAD GNSS SHALL HAVE NO LIABILITY FOR DAMAGES OR OTHERWISE TO YOU OR ANY
OTHER PERSON OR ENTITY IN EXCESS OF THE PURCHASE PRICE FOR TTRIUMPH -VS.

«
...
3
4
5
6
7
...
»

Содержание TRIUMPH-VS

































































































Отзывы:

Нет отзывов

Похожие инструкции для TRIUMPH-VS

Wall Mount Adaptor 010882

Бренд: CyberData Страницы: 2

Бренд: Reer Страницы: 2

Satlook Micro G2

Бренд: emitor Страницы: 24

Бренд: A-Neuvideo Страницы: 20

Бренд: AeroComm Страницы: 57

Бренд: VDO Страницы: 14

Бренд: Topfield Страницы: 68

Бренд: Lafayette Страницы: 30

Бренд: Dish Network Страницы: 26

Бренд: Optimus Страницы: 40

DTR94 HD FREESAT

Бренд: Sagem Страницы: 48

VALUE LINE LR 26 R

Бренд: Wisi Страницы: 4

Бренд: Denon Страницы: 27

Бренд: Aiwa Страницы: 4

Бренд: TANDBERG Страницы: 27

Бренд: Boss Audio Systems Страницы: 36

Бренд: Eclipse Страницы: 141

Бренд: Jensen Страницы: 26

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды