Page
31
of
35
6.6. File Maintenance
If post-processing the data after completing a task, the data in the receiver’s memory will need
to be downloaded to a PC. Downloading and deleting files will also prepare the receiver’s
memory for the next task. Occasionally, the receiver’s NVRAM may need to be cleared to
eliminate communication or tracking problems. As project expectations expand, the receiver’s
OAF may need to be updated to provide expanded operation and functionality. The receiver
requires firmware to properly operate and provide appropriate functionality. As JAVAD GNSS
releases firmware updates, loading these updates into the receiver will ensure that the receiver
operates at its full potential.
When measuring is complete, download the files to a PC for storage, post-processing, or
backup. Also, the memory holds a finite amount of data, so downloading the files to a computer
ensures that no data is lost or overwritten. Download files as soon as possible after collecting
data at the jobsite.
•
Connect your receiver and computer. Start NetView&Modem. Establish a connection
between NetView&Modem and receiver.
•
Click
Files
on the left panel. On the right panel appears the list of files, saved in
receiver’s memory. Select the file(s) to download:
Figure 14: Downloading Files
Click the
Download
button. During the download, status indicators display each file.
To delete files from your receiver click
Delete
. Click
Yes
at the delete files confirmation dialog
box. NetView&Modem will delete the selected files.
