Javad Maxor, Руководство пользователя

Страница: 66 / 142

2-32 Maxor User’s Manual www.javad.com
2
C O N F I G U R A T I O N
Bluetooth Module Configuration
3.
Run the Bluetooth module configuration program (Btconf.exe) (Figure 2-
38).
Figure 2-38. Bluetooth Module Configuration Main Screen
Notice that the lower left corner shows a “Disconnected” status for the
computer and Bluetooth module.
For BTCONF version and copyright information, click the About button.
4.
From the drop-down list in the upper left corner, select the computer serial
port used for communication (Figure 2-39).
Figure 2-39. Select Communication Port and Click Connect
5.
Click Connect to connect the computer and Bluetooth module (Figure 2-
39).
Once the receiver and computer connect through BTCONF, the Identification
tab (Figure 2-40) displays the following information:
•
Bluetooth name – the name of the Bluetooth module, set in the Parameters
tab.
•
Bluetooth address – the unique electronic address for your Bluetooth
module.
•
Firmware base.