Javad Maxor, Руководство пользователя

Страница: 62 / 142

2-28 Maxor User’s Manual www.javad.com
2
C O N F I G U R A T I O N
Radio Configuration
16.
Click Close and then Exit to quit the program (Figure 2-34).
Figure 2-34. Click Close then Exit
17. Open PCView.
18. Click File->Connect .
19. On the Connection Parameters screen, select a baud rate of 38400 and
enable the Manual mode only check box (Figure 2-35), then click Connect .
Figure 2-35. Connection Parameters – Manual Mode Only
20.
On the Manual Mode screen, write the following commands, pressing Enter
(or clicking Send command) after each command. When finished, you
should have five responses (Figure 2-36).
QUIT
%%set,cur/term/imode,cmd
%%set,dev/ser/c/echo,/dev/null
%%set,dev/ser/c/imode,cmd