Javad Maxor, Руководство пользователя

Страница: 56 / 142

2-22 Maxor User’s Manual www.javad.com
2
C O N F I G U R A T I O N
Radio Configuration
4.
To create a daisy chain between the receiver's port (A or D) and the Maxor
PDL modem, type each of the following commands, pressing Enter (or
clicking Send command) after each command.
%%set,dev/ser/c/rate,38400
%%set,dev/ser/c/echo,/cur/term
%%set,dev/ser/c/imode,echo
%%set,cur/term/eoff,QUIT
%%set,cur/term/echo,/dev/null
%%set,cur/term/imode,echo
%%set,cur/term/echo,/dev/ser/c
The Manual Mode screen will show RE002%% in response to each of these
commands. When finished, you should see a window that looks like
Figure 2-23.
Figure 2-23. Manual Mode – Command Responses
Tip:
Save this set of commands to a script file and load
this file later to the receiver with a single operation.
To create a script file, see “Creating Scripts” on
page A-1.
5.
Click Disconnect (Figure 2-23).
6.
Run the PDL Radio Configuration Program (pdlconf.exe) from Pacific Crest
(Figure 2-24).