Javad Maxor, Руководство пользователя

Страница: 108 / 142

4-20 Maxor User’s Manual www.javad.com
4
O P E R A T I O N
Loading New Firmware
13.
Select the Program tab and set the Capture Method to Soft Break Capture
(recommended) (Figure 4-18).
Figure 4-18. Program Tab Settings
14.
Browse for and select the Power board's RAM file (Figure 4-18).
15.
Click Load and wait until 100% of the power board file loads into your
receiver.
Notice: If you selected an incorrect RAM file, an error message
displays at the bottom of the dialog box. Reselect the
correct file.
16.
Click File->Exit .
17.
Clear the receiver’s NVRAM (see“Clearing the NVRAM” on page 4-14)
and update the almanac (“Collecting Almanacs” on page 2-34) after loading
new firmware.