Javad LMR400, Руководство пользователя

Страница: 20 / 24

20 www.javad.com
ALARM – Alarm Indication and Alarm
Control Configuration
SLEEP – Sleep Mode Configuration
CONNECT – Connect to Specified Unit
STATE – Display Status and Statistics
SAVE – Save Current Configuration into
Configuration File
INFO – Display Product ID along with
Hardware/Software Versions
DATAMODE – Exit Maintenance Mode
[COMMAND] /? – Display Command Usage
SAVE
The SAVE command is intended to store the unit’s cur-
rently used configuration into the User Configuration
file. The configuration stored in the User Configuration
file is activated by automatically after unit’s reboot.
SLEEP
The SLEEP command determines the sleep mode pa-
rameters. The sleeping LMR400 can be activated by
real-time CLK, DTR/RTS lines, and command received
through TTL inputs. The user can select one, two, or
all three conditions.
SLEEP [Parameter Name] [Parameters List]
[/?]
Parameter
Name
Parameter List
CLK
0 – Do not activate by internal real-time
clock
(1 – 255) – Activate by internal real-time
clock after 100 to 25500 msec of sleeping
HW
0 – Do not activate through DTR/RTS lines
1 – Activate through DTR/RTS lines
TTL
0 – Do not activate by external sense lines
1 – Activate by external sense lines
GTS
0 – Disable Sleep mode (default)
(1 – 255) – Go to sleep mode if there is no
activity in 10 to 2550 msec
Diagnostics and Identification
Commands
INFO
The INFO command is used to retrieve the Radio ID
along with its Hardware version, the loaded real-time
software version/revision and BootLoader’s version/
revision.
INFO [Parameter Name] [Parameters List]
[/?]
Parameter
Name
Parameter List
ID Product ID
SN Six bytes Serial Number (SN)
HW
1.0 – hardware version in numeric “Major.
Minor” format
SW
Ver. 1.0 Rev. A – displays software’s ver-
sion in numeric “Major.Minor” format and
revision in numeric format (range from 01 to
99) for engineering releases and alphabetic
format (A to Z) for manufacturing releases
BL
Ver. 1.0 Rev. A – displays BootLoader’s ver-
sion in numeric “Major.Minor”format and
revision in numeric format (range from 01 to
99) for engineering releases and alphabetic
format (A to Z) for manufacturing releases
The INFO command without Parameter Name indi-
cates all values:
LMR400 UHF Radio Modem.
Product ID = 33
S/N = 000000 020303
Hardware = Ver. 1.0
Software = Ver. 1.8 Rev. 14
BootLoader = Ver. 2.0 Rev. 02
STATE
The STATE command is used to check the state of the
wireless link, the unit in the link, and the alarm con-
trol lines.
STATE [Parameter Name] [Parameters List]
[/?]
Parameter
Name
Parameter List
TTL1 0/1 – State of TTL_IN1 line
TTL2 0/1 – State of TTL_IN2 line
RSSI
-52 to -116 dBm – Indicates the Receive
Signal Strength in dBm