...Setup HPT404BT JL to provide RTK
data received via NTRIP Client to Se-
rial Port
The following are the steps of configuration
of HPT404BT JL:
1. Connect to HPT404BT JL via web interface
as described above.
2. Configure the Cellular (GSM ):
In the Communication/GSM tab set the PIN
code and APN parameters (if necessary);
Figure 9. HPT404BT JL GSM configuration tab
Use tweezers to install or remove micro SIM
card. Insert the SIM card to its slot. The first
slot from the green top cover is for micro
SIM, the second slot is for micro SD.
In the Communication/Power Management
tab activate the GSM interface.
Figure 10. HPT404BT JL Power Management tab
Wait for registering in the network and Inter-
net access availability . Detailed connection
status you can check in Status/GSM tab.
Figure 11. HPT404BT JL GSM Status tab
It is possible also to connect HPT404BT JL
to Internet via LAN or WiFi using any WiFi
router, MiFi device or even smart-phone con-
figured in hot spot mode.
3. Setup Serial Port. In the Communication/
Advanced tab select “Serial port as” param-
eter as Terminal. Click “Save Setting” button
and wait until finish.
How to...
10
HPT404BT JL USER MANUAL
