Jatontec JT6300D, Руководство администратора пользователя

Страница: 6 / 37

Page 6
www.jatontec.com
3) Installing the Equipment
 Device Logic connection
For outdoor CPE product, it is suggested that the CPE device be installed in a shaded area to avoid
direct sun light exposure which may cause over heat in certain extreme weather condition.
To power on the device, the outdoor CPE must use a 48V PoE integrated DC power supply adapter.
The power adapters can operate in 100-240V AC range and therefore can be used in different country.
Once the device is powered up, the user should wait for about 1 minutes before the device becomes
operational. When the RF1 LED becomes blinking green, it indicates the system has completed the
startup procedure.
To connect PC, LAN switch or other type of IP device to the CPE product, the user should use SFTP
CAT5E Ethernet cable and connect to the appropriate LAN port. Once connected, the ETH LED
indicator should come on.