Jaton SonicWave-SR, Руководство пользователя

Страница: 73 / 83

SonicWave - SR
User’s Guide
Version 4.0
73
My DOS games do not work properly with FM801
based sound card and the system pops up the
message "Can't find PCI Chipset Device!" during
system boot-up.
If your sound card does not work properly with your
DOS games, and you see the message "Can't find
PCI Chipset Device!" when the system is executing
G801.EXE in AUTOEXEC.BAT, that means your
system is using very old generation chipsets. Please
open the file C:\AUTOEXEC.BAT to check if there
is one line as following: "C:\CFG801". If this line
does not exist, it means the driver is not installed
properly. Please re-install the FM801 driver again. If
this line exists, please change it to "C:\CFG801 /1
/t". In Windows 95 or Windows 98, use "Regedit"
under C:\Windows to find one string called
'DOSMODE' and change the value from 00 to 01.
What to do if sound card is not found or IRQ
is not assigned to FM801 PCI sound card?
Change slot: insert the PCI audio card into another
PCI slot. (Do so by first shutting down the
computer. Remove the sound card and insert it into
another PCI slot.) If the problem persists: if you are a
new user, uninstall the driver and re-install it from
the beginning. (For Uninstalling instructions, see
“UN-installing the FM801 driver” section below.)
Adjust BIOS settings: get into BIOS (usually, hit
"F1", "Del" or "F10" after Reboot), get into the