Jaton AV152, Руководство пользователя

Страница: 9 / 25

WHEN YOU CONNECT THE ANV THEATER WITH AN AUDIO
DIGITAL DECODER.
The RCA cable referred to this illustration is provided from the manufacturer if you purchased ANV
theater Speaker System Package.
Other connection:
When you connect The ANV theater with Audiophile Stereo output.
To connect with the L&R RCA jack of speaker system’s RCA cable only. This cable is provided
from the manufacturer and those RCA jacks are labeled by the characters in English and defined
as below.
L R SL SR C W
Front Left Front Right Surround Left Surround Right Center Subwoofer
Speaker Setup
For the best possible surround sound all the speakers other than the subwoofer should be the
same distance from the listening position (A).
However, this system lets you to place the center speaker up to 5ft. (150cm.)closer (B) and rear
speaker up to 15ft. (450cm.) closer (C) to the listening position.
The front speakers can be placed from 3ft. (90cm.) to 15ft. (450cm.) (A) from the listening position.
The front and center speakers should be placed as about the same height as the sitting listener’s
ears, and the rear speakers should be slightly higher in order to build an ambient sound
accompanying the main program material heard in the front speakers.
You can place the subwoofer at any position. But you should try to put the subwoofer facing
different directions, then you will know which direction can provide the best sound effects.
You can place the rear speakers either behind you or to the side, depending on the shape of your
room, etc.
Regarding Volume adjustment, you should firstly turn both Master Volume Subwoofer Volume and
Subwoofer feq cut/off to minimum position. Then you turn on the Master Volume to suitable
position, finally you turn on the Subwoofer Volume and Subwoofer feq cut/off to get the bass you
desire.
Speaker Wire Connections:
For ANV theatwer connections, all speaker terminals have been identified polarity to use red color
to denote the (+) terminal and black color for ( - ) terminal. And the (+) polarity of lead of speaker
wire is noted with the red stripe line which must be connected to the red terminal.
It is important to connect both speakers identically : (+) of speaker terminal to the (+) of subwoofer
terminal and ( - ) of speaker terminal to the ( - ) of subwoofer terminal. Wiring “ out of phase
“ results in thin sound, weak bass and a poor stereo effect.
10.