40
connector (d) to graphic card's VGA output signal port
(i).
3.
Screw in the bolts (g) solidly.
4.
Connect monitor's VGA signal input cable (b) to VGA-
PT synchronizer(c) 15-pin female connector (e).
5.
Connect 3D LC shutter glasses' plug (k) to VGA-PT
synchronizer(c) glasses jack (f).
Please make sure
that the plug is connected all the way to the end
.
6.
The installation of 3D glasses is done. Please turn on
power of the computer, and boot up PC to Windows
environment.
Special Note:
•
After the completion of 3D glasses’ installation, please do not
disconnect VGA-PT synchronizer anytime when your PC is powered on.
Be sure to turn off the power of your PC anytime before you want to
connect or disconnect VGA-PT synchronizer.
•
3D LC shutter glasses will not work unless nVIDIA’s stereoscopic
effect is enabled.
