Jatco RE4F04B, Руководство пользователя

Страница: 448 / 708

AT-448
[RE5F22A]
TROUBLE DIAGNOSIS
Revision: November 2006 2006 Altima
5.
CHECK SHIFT-UP D4
→
D5
Press down the accelerator pedal about half way and inspect if the vehicle shifts up (D4
→
D5) at the appropri-
ate speed.
●
Refer to AT-450 .
With CONSULT-II
Read the gear position, throttle degree of opening, and vehicle speed.
Does the A/T shift-up D4
→
D5 at the correct speed?
Yes >> GO TO 6.
No >> Enter a check mark at “A/T does not shift D4
→
D5” on the diagnostics worksheet, then continue
the road test.
6.
CHECK LOCK-UP
When releasing accelerator pedal from D5, check lock-up from D5 to L/U.
●
Refer to AT-450 .
With CONSULT-II
Read the lock-up status.
Does it lock-up?
Yes >> GO TO 7.
No >> Enter a check mark at “A/T does not perform lock-up” on the diagnostics worksheet, then continue
the road test.
7.
CHECK LOCK-UP HOLD
Does it maintain lock-up status?
Yes >> GO TO 8.
No >> Enter a check mark at “A/T hold does not lock-up condition” on the diagnostics worksheet, then
continue the road test.
8.
CHECK LOCK-UP RELEASE
Check lock-up cancellation by depressing brake pedal lightly to decelerate.
With CONSULT-II
Read the lock-up status.
Does lock-up cancel?
Yes >> 1. Stop the vehicle.
2. Go to Cruise test - Part 2 (Refer to AT-448 ).
No >> Enter a check mark at “Lock-up is not released” on the diagnostics worksheet, then continue the
road test. Go to Cruise test - Part 2 (Refer to AT-448 ).
Cruise Test - Part 2
ECS009D4
1.
CHECK STARTING FROM D1
1. Move selector lever the “D” position.
2. Accelerate at half throttle.
With CONSULT-II
Read the gear position.
Does it start from D1?
Yes >> GO TO 2.
No >> Enter a check mark at “Vehicle cannot be started from D1” on the diagnostics worksheet, then
continue the road test.