Jatco RE4F04B, Руководство пользователя

Страница: 445 / 708

TROUBLE DIAGNOSIS
AT-445
[RE5F22A]
D
E
F
G
H
I
J
K
L
M
A
B
AT
Revision: November 2006 2006 Altima
●
Before beginning the road test, check the test procedure and
inspection items.
●
Test all inspection items until the symptom is uncovered. Diag-
nose NG items when all road tests are complete.
Check Before Engine is Started
ECS009D1
1.
CHECK A/T CHECK INDICATOR LAMP
1. Park vehicle on level surface.
2. Move selector lever to “P” position.
3. Turn ignition switch “OFF” and wait at least 10 seconds.
4. Turn ignition switch “ON”. (Do not start engine.)
Does A/T CHECK indicator lamp light up for about 2 seconds?
Yes >> 1. Turn ignition switch “OFF”.
2. Perform the self-diagnostics and record all NG items on the diagnostics worksheet. Refer to AT-
463 , AT-468 .
3. Go to AT-445, "Check at Idle" .
No >> Stop the road test and go to AT-598, "A/T CHECK Indicator Lamp does not come on" .
Check at Idle
ECS009D2
1.
CHECK STARTING THE ENGINE
1. Park vehicle on level surface.
2. Move selector lever to “P” position.
3. Turn ignition switch “OFF”.
4. Turn ignition switch “START”.
Does the engine start?
Yes >> GO TO 2.
No >> Stop the road test and go to AT-600, "Engine Cannot Be Started In “P” or “N” Position" .
2.
CHECK STARTING THE ENGINE
1. Turn ignition switch “ACC”.
2. Move selector lever in “D” or “R” position.
3. Turn ignition switch “START”.
Does the engine start in either position?
Yes >> Stop the road test and go to AT-600, "Engine Cannot Be Started In “P” or “N” Position" .
No >> GO TO 3.
SAT496G