13
LEGS ASSEMBLING
• The legs (5) must be assembled at the end of the lower part of the appliance.
• Match the holes of the legs with the axes located in the lower part, then screw them.
FOLDING UPPER BARS
• Insert the four ends of the metal tubes into the four lugs of the plastic parts with folding bars. Next, with the
bars open, place the whole set in the top side of the appliance, making coincide the holes where the screws
will be placed. Screw them.
INSTRUCTIONS OF USE
• Unwind totally the cord from the cord storage.
• Plug in the appliance to the mains.
• Turn the thermostat knob (3) clockwise to the maximum position (MAX.)
• Place the power selector (2) in the desired position. Doing this operation the indicator (4) will light on. Have
in mind that:
-
Position I: minimum power.
-
Position II: maximum power.
-
Position 0: off.
• Once the room reached the desired temperature, turn the thermostat knob (3) anti-clockwise until the pilot
light (4) goes off. Leave the knob in that position and the thermostat automatically maintains at the selected
temperature.
• The foldable bars (8) are used to hang and dry textile products with its upper position.
Attention: avoid any
direct contact of the textile product with the appliance.
If the appliance is on and the bars in their closed
position, never transport it by grabbing them.
Information requirements for electric local space heaters
Model identifier(s):
Item
Symbol
Value
Unit
Item
Unit
Heat output
Type of heat input, for electric storage local
space heaters only (select one)
Nominal heat
out put
p
nom
2,0
kW
manual heat charge control, with
integrated ther mostat
no
Minimum heat
output (indicative)
p
min
1,2
kW
manual heat charge control
with room and/or outdoor
temperature feedback
no
Maximum
continuous heat
output
p
max,c
2,0
kW
electronic heat charge control
with room and/or outdoor
temperature feedback
no
Auxiliary electri
city consumption
fan assisted heat output
no
At nominal heat
output
el
max
N/a
kW
Type of heat output/room
temperature control (select
one)
At minimum heat
output
el
min
N/a
kW
single stage heat output and no
room tempera ture control
no
In standby mode
el
sB
N/a
kW
Two or more manual stages, no
room tempera ture control
no
with mechanic thermostat room
temperature control
yes
with electronic room
temperature control
no
electronic room temperature
control plus day timer
no
electronic room temperature
control plus week timer
no
01 manual jata calor RD227.indd 13
19/06/18 12:25
