11
• Make sure neither the appliance nor the cables are in direct
contact with hot surfaces or objects.
• Always place it on a flat surface.
• Always disconnect it from the mains when you do not use it
and before assembling / disassembling or when cleaning.
• Take all necessary precautions while handling the blade, as it is
very sharp.
• The cleaning and maintenance done by user can not be done by
children without any supervision.
• If the cable were to deteriorate it must be changed by an
Authorised Service Centre.
INSTRUCTION OF USE
• Place the jug (3) on the main body (4).
• Pour the food into the jug and place the lid on it, making coincide the security lock (13) with the handle.
ATTENTION:
-
Do not pour into the jug food or liquids too hot.
-
To avoid leakage do not pour more than 1,8 L of liquid into the jug
• Plug the appliance into the mains. The on button (5) will flash. Press it, the digital screen (12) and the pilot
lights with light on. The lights will be always on meanwhile the security lock (13) is closed. The item can not
be operated, will emit an acoustic signal and the pilot lights will be switched off, if the security lock remains
opened. The digital screen (12) will show 3 hyphens. The item will be switched off after some minutes.
• Choose the speed by pushing the pusher “Velocidad” (7) repeatedly till getting the desired speed. The item
has 8 speed levels that will be showed in the digital screen. Once the speed is chose, to start push the “Inicio /
paro” button (11), you can change the speed level during the functioning just pushing the “Velocidad” button
again. By default, the working time is 120 seconds (maximum), you can change it by pressing the “”
button (6). If you wish, you can stop the blender at any time by pressing again “Inicio / paro”.
• You may add ingredients to the jug while in use without open the lid. To do so, remove the stopper (1). Turn
it slowly anti-clockwise and take it out. Add the ingredients into the jug and place again the stopper making
coincide the two flanges into the guides of the lid and turn it slightly anticlockwise.
• Once you have finished, switch off the appliance and wait for the blade until stops before removing the jug.
KNOBS USING
ICE CRUSH KNOB (8)
• Pushing that knob the blender will work intermittently. For it, we suggest to use little ice cubes, or you can
bit them before putting them on the blender, to avoid the “igloo” effect. This means that the crushed ice gets
adhered to the blender walls, and it impedes that the other ice cubes arrive to the base to be crushed. The
digital screen (12) will show the maximum working time (120 seconds) and will start the countdown. At any
time, you can stop the blender by pushing the “Inicio / paro” button, this button will flash.
SMOOTHIE KNOB (9)
• Push this knob and the blender will work at the maximum power for 120 seconds as maximum. If you wish to
stop in advance, you can push “Inicio / paro” pusher, this button will flash.
PULSE KNOB (10)
• This knob gives you the option to use the blender intermittently, as it will only work while you keep that
knob pushed, it will stop when it is released. The digital screen (12) shows the maximum time that it can be
functioning and will start a countdown.
• You also can use this function to clean the blade once the jar is empty.
01 JATA manual bt1050.indd 11
25/03/19 16:01
