Jata calor DUAL-KHER DK1000P, Инструкция по использованию

Страница: 17 / 20

17
• Then repeatedly pressing the button to select the time for which the unit will remain on and then off.
• To activate the “Replay” function hold the button until the hours’ leDs flash, indicating the beginning of the
cycles.
• Immediately the hours’ leds start flashing, stop pressing the button, because if you leave it down longer, it
will switch to oN-eCo mode.
• To disable the “replay” mode press once on the button.
ON / ECO MODE
• With this mode you can program cycles on / eco, which will be repeated.
• select the desired operating temperature by pressing the button as indicated above.
• Then repeatedly pressing the button you’ll select the time for which the device will stay on at the selected
temperature and then in position eCo (18 °C).
• To activate the function oN / eCo hold the button until the hours and the temperature leDs flash, indicating
the start of the cycles.
• To disable this mode, press once the button.
ANTIFREEZE FUNCTION
• With this feature you can set the device to be connected when the temperature in the room drops below 7
degrees C.
• To activate this mode, the switch must be oN (1) and temperature leDs off.
• To do so, repeatedly press the button until the temperature’s leDs turn off.
BLOCKING OF THE DEVICE
• To prevent manipulation of the controls you can activate the lock by pressing simultaneously the buttons
and .
• after 10 minminutes from the activation of blocking, the leDs will turn off.
• To unlock the device, proceed the same way.
TO TURN OFF
• When not using the heater, turn off the switch (1) and disconnect the device from the mains.
PAINTING THE “C” MODEL
• If you have purchased the model
DK1000C
or
DK2000C
, you can paint it the color you want.
• To do this, first, apply a coat of primer to ensure the paint adherence.
• paint device with at least 70 ºC resistant paint.
MAINTENANCE AND CLEANING
• Before you proceed to cleaning, ensure the appliance is unplugged from the mains.
• leave cool down the warm parts and clean with a soft dry cloth.
• Keep clean the air entrance and output grid.
• Never use chemical or abrasives, metal scourers, which may deteriorate the surfaces of the appliance.
ENVIRONMENT PROTECTION
• Dispose the appliance according to the local garbage regulations.
• Never throw it away to the rubbish. so you will help to the improvement of the environment.
01 manual jata DK1000P-2000P.indd 17 14/07/16 16:25