9
8
FRANÇAIS
• The fixed installation of this appliance on the wall of a bathroom
always must be done at a distance where no person in the shower
or in the bath may touch it or switch it on.
• Do not rest the cable on hot parts of the appliance.
• The heater can produce smell during the heating, which is normal
in this kind of appliances.
• If the cable were to deteriorate it must be changed by an Authorised
Service Centre.
FEET ASSEMBLING
• Place the supports with the wheels (5) in the bottom part of the
appliance. Make the 2 holes of the support match up the 2 holes
of the metallic sheet and screw them. (Fig A)
WALL ASSEMBLING
• The wall assembling support is mounted from the factory. In order
to proceed to the wall mounting, you have to follow these steps:
1.Take the wall mounting support away from the appliance body by
pressing the two tongues of the lower part and taking them away
of their location.
2.Then slide the support to the lower part of the appliance and take
it away.
• Before installing definitively on the wall, you have to take into
account that the support has to respect, once installed, the following
distances:
From the floor: 250 mm.
• All objects (table, shelve etc.) must be 30 cm. over the appliance.
• The distances of fig. B have to be respected. These distances will
vary in function of the model you have chosen. Find below the
distances:
MODEL
AT10
AT15
Distance A
275 mm.
440 mm.
Distance B
445 mm.
405 mm.
• To fix the appliance to the wall. (Fig B)
- Place the support (6) against the wall and mark the holes.
- Perforate the wall on the marked holes and insert the raw plugs.
- Fix the support to the wall with the screws provided with the
appliance.
- Place the radiator inserting the upper flanges of the support in the
corresponding windows and press down to get it correctly fixed.
- Next, in the lower part and using both hands, make the tongues
of the support match up the corresponding holes and press the
appliance against the support.
INSTRUCTIONS OF USE
• Plug in the appliance to the mains.
• Turn the thermostat knob (3) clock-wise to the maximum position.
(Max)
• Turn the power selector (2) to the desired position. The indicator
light (4) will light on.
Position I : Minimum power. (AT10-500 W) - (AT15-750W)
Position II : Maximum power. (AT10-1000 W) - (AT15-1.500W)
Position 0 : Off.
• When the room reaches the desired temperature, turn the
thermostat knob (3) anti-clock-wise until the pilot light (4) goes
off. Leave the knob in that position and the thermostat will
automatically maintain at the selected temperature.
• When you are not in use the appliance, set the power selector (2)
to the “0” (off) position and unplug the appliance from the mains.
MAINTENANCE AND CLEANING
• Before you clean the appliance, ensure the appliance is unplugged.
• Allow the hot parts to cool.
• It is important to keep the air intake and output grids clean of
dust and fluff.
• Clean with a soft dry cloth.
• Do not use chemical or abrasive products, such as metallic scourers,
which may deteriorate the surfaces of the appliance.
ENVIRONMENT PROTECTION
• Dispose the appliance according to the local garbage regulations.
• Never throw it away to the rubbish. So you will help to the
environment protection.
ATTENTION
• Lisez attentivement ces consignes avant de mettre l’appareil en
marche et conservez-les pour de futures consultations.
• Cet appareil n’est pas destiné à l’usage des personnes (y compris
des enfants) dont les capacités physiques, sensorielles ou mentales
sont limitées ou manquant d’expérience et de connaissances à
moins qu’elles ne reçoivent des instructions précises concernant
l’utilisation de cet appareil ou ne soient supervisées par une personne
responsable de la sécurité.
• Ne laissez pas les sacs plastique ni les éléments de l’emballage à
portée des enfants. Ce sont des sources potentielles de danger.
• Ne branchez pas l’appareil sans vérifier que la tension indiquée sur
la plaque signalétique coïncide avec celle du secteur.
• Vérifiez que la base de la prise mâle dispose d’un connecteur de
terre approprié.
• ( )Ne couvrez pas l’appareil pour éviter son échauffement
excessif.
• N’installez pas l’appareil soufflant à proximité d’une douche, d’une
baignoire, d’un lavabo ou d’une piscine.
• Ne pas l´humidifier ni le submerger dans l´eau ou dans un tout
autre liquide.
