9. PROGRAM CARD
9.1 Installation and Removal
①
Program Card
②
Card Protection Cover
③
Card Connector
[Picture I-15. Program Card Installation]
Program Card Removal
;
After turning off the power, open the card protection cover downwards and pull out the
end of the program card inserted in connector.
Program Card Installation
;
Insert the program card in the connector as seen in the above picture.
;
Turn on the power.
(Power Reset! In case the replacement was done when the power is on, turn off the
device and turn it on again. If the power is not reset, the existing card program, not the
new program, is operated.)