Jaspi Inverter Nordic-12, Руководство по установке

Страница: 24 / 68

Configuration using DIP switch
The communication address for JÄSPI Inverter Nordic to
the indoor module / control module is selected on the
base board (AA2). DIP switch S1 is used for configuration
of address and functions. For cascade operation with
Jäspi MCU 40 for example, addressing is required.
JÄSPI Inverter Nordic has the address
1 as standard. In a
cascade connection all JÄSPI Inverter Nordic must have
a unique address. The address is coded in binary.
NOTE
Only change the DIP switches position when
the product is not powered.
Default set-
ting Address
(com)
Slave DIP S1 position
(1 / 2 / 3)
OFF 01 Slave 1 off / off / off
OFF 02 Slave 2 on / off / off
OFF 03 Slave 3 off / on / off
OFF 04 Slave 4 on / on / off
OFF 05 Slave 5 off / off / on
OFF 06 Slave 6 on / off / on
OFF 07 Slave 7 off / on / on
OFF 08 Slave 8 on / on / on
Default set-
ting Function Setting DIP S1 posi-
tion
OFF Permits cool-
ing ON 4
Default setting Setting DIP S2 position
OFF OFF 1
OFF OFF 2
OFF OFF 3
OFF OFF 4
Switch S3 is the reset button that restarts control.
Caution
DIP S1 position 4 must be changed to ON in
order to run cooling
JÄSPI Inverter Nordic Chapter 5 | Electrical connections 24