Jason.L Just Right, Инструкция по сборке

Страница: 4 / 4

A
4x4
G
A
5
4
A
7
6
G
G
STEP6
Tighten the Beam Screw and the
Drive Rod Nut
Use the 4 x 4 allen key (A) to tighten the 8 screws on the long
and short beams (4) (5), and use the nut wrench (G) to tighten
the nuts on the long and short transmission rods (6) (7).
14
12
13
B
x8
A
2.5x2.5
15
15
15
15
A
11
B
5
11
4
STEP7
STEP8
Install Baffle
Install the baffle (11) on the long and short beams (4) (5)
with screws (B), and tighten it with a 2.5 x 2.5 allen key(A).
Connect all Cable on to the Control Box
Do not connect the power before the wiring is completed.
You can use the cable tie (15) to
sort out the cables on the table
to keep the cables tidy.
Tear off Manage cable Fix
Port for
handset
Power port
Port for cable
connected to the
lifting column
Attention
1. Power supply: AC100V
-
240V,50/60Hz
2. Service Environment: 0-40
℃
3. Unplug the power plug before cleaning, wipe the dust on surface with slight wet
dishcloth when cleaning, be careful not to let the drops into the internal parts, not loose
the connector.
4. The electric box contains electronic components, metals, plastics, wires etc., so
dispose of it in accordance with each country's environmental legislation, not the
general household waste.
5. Check carefully to ensure correct and complete assembly before using.
6. Be familiar with all functions and program settings of the product before first use.
7. Children are forbidden to play on the product because of unforeseen action when
playing, so any dangerous consequences caused by this improper action will not be on
manufacturers.
8. Slight noise caused by the V-ribbed belt or brake system due to structure will not
have any effect on the use of the equipment.
9. Corrosive or abrasive materials are forbidden to clean the equipment. Must ensure
that the cleaner used will not pollute the environment.
10. This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved. Children shall not play
with the appliance.
11. Cleaning and user maintenance shall not be made by children without supervision.
12. If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or a similarly qualified person in order to avoid a hazard.
13. Please make sure there is no hazard sources in your operating environment. e.g.,
do not litter the tools around. Always be careful to treat the packaging materials in order
to avoid any possible danger, e.g. plastic bag may lead to choking hazard to children.
14. Keep the original package of the equipment if necessary in case of the future use in
transportation.
Common fault treatment
The following tips will help you detected and eliminate the common
fault and error. If the error you meet is not on the list, please contact
our customer service.
Error Method
No response while pressing
The desktop moving towards
the opposite direction as ordered
Rising in a low speed
The desk moving downwards
without any operation
Automatically Self-Reset
Overload Operation
Can’t reach the min or max height
Check if all the cables well connected;
Reset;
Check if overloaded, max loading: 100kg;
Check if overloaded, max loading: 100kg;
Check if overloaded, max loading: 100kg;
Restart after suspend for 18mins while
connecting with power;
Reposition;