With the legs assembled, place each end of the top rail (2) into the holes
on the side of the upper wrist, making sure they stop before going all the
way through. (It is permissible in some applications for top rail to
protrude out further past the wrists.)
Place the top rail cap (6) into the exposed side end of the top rail.
Locate the plastic support bracket (10) over the
centre of the top rail, and click into place.
Fully tighten the small screws located at the bottom of each upper
wrist to firmly hold the top rail in place.
Page 4 of 5
ASSEMBLY INSTRUCTIONS
Blackjack Boardroom Table
Indented Chrome Legs
Need help!
Call us on
1300 527 665
www.jasonl.com.au
2
6
10
05
06
07
08
