Jason International, Inc. •
501.771.4477
Page 11 of 18
Customer Service : 800.255.5766
Copyright © 2014 Jason International.
OPERATING INSTRUCTION, FEATURES, AND CONTROLS
INTRODUCTION
This manual contains all of the information needed for the
proper installation and operation of your Jason MicroSilk
®
-
AirMasseur
®
bath. The bath has been designed to give you
years of relaxing trouble-free service, provided the unit is
maintained and operated in accordance with these instructions.
Thoroughly clean and disinfect the unit as described in
the
CLEANING
section of the
USER MAINTENANCE
INSTRUCTIONS
section of this owner’s manual before its first
use and periodically thereafter.
CAUTION:
Keep hair, towels, and clothing away from the
suction fitting whenever the equipment is On. Never operate
the equipment with the suction cover off, as doing so voids
the manufacturer’s warranty. It is a safety cover designed to
eliminate the potential of hair and body entrapment.
All Jason MicroSilk
®
-AirMasseur
®
baths are pre-plumbed at
the factory.
WARNING: Before operating refer to the instructions at
the end of this owner’s manual pertaining to the risk of
fire, electric shock, or injury to persons.
FEATURES AND CONTROLS
STANDARD AND PREMIER EDITION MICROSILK
®
-AIRMASSEUR
®
The Jason Standard Edition MicroSilk
®
-AirMasseur
®
bath
provides both a Microbubble generator unit and an air bath
system. The air bath system includes a variable-speed,
1-HP air blower with heater and three (3) massage modes:
Continuous, Wave, or Pulse; an electronic control; and a
20-minute timer.
The Jason Premier Edition MicroSilk
®
-AirMasseur
®
bath
provides all the features of the Standard Edition with the
included benefits of a LED Chromatherapy Mood Light, and
an Ozone Sanitation system.
Standard/Premier Touchpad
One main control touchpad mounted on the bath deck features
several icons used by the bather to control the MicroSilk unit,
blower, and LED mood light. A built-in timer shuts the pump
off 20 minutes after being activated.
Standard / Premier Edition Automatic Purge
Fifteen (15) minutes after the control has shut off, the
blower will start again for a two-minute purge cycle that
dries the air channel. Note that the blower light will flash
during the 15-minute pause before the purge cycle begins.
Once the purge cycle begins, all indicators will light and
the keypad operation will be disabled for two (2) minutes.
SIGNATURE EDITION MICROSILK
®
-AIRMASSEUR
®
The Jason Signature Edition MicroSilk
®
-AirMasseur
®
bath
includes both a Microbubble generator unit and an air bath
system. The air bath system includes a variable-speed,
1-HP air blower with heater and three (3) massage modes:
Continuous, Wave, or Pulse. The system also includes
Chromatherapy mood lights, Automatic Ozone System that will
be operated any time the MicroSilk
®
unit is powered; a digital
control with LCD display window; low water and temperature
sensors; and a 20-minute timer.
Signature Touchpad
A main control touchpad mounted on the bath deck features an
LCD readout which alternately indicates the water temperature
(+/- 5°F) and time remaining. The Signature Edition touchpad
allows the bather to control the MicroSilk
®
unit, blower, and
LED mood light. A built-in timer shuts off the pump 20 minutes
after being activated.
Signature Remote Control
In addition to the main control touchpad installed on the bath
deck, a floating, waterproof Universal Remote Control is
provided with all Signature Edition MicroSilk
®
-AirMasseur
®
baths. This remote control provides the same control functions
as the bath’s main control console, plus the bather may
remotely operate a TV, DVD, VCR, CD, etc. Refer to the
Instruction Manual provided with the remote control for detailed
instructions.
Signature Edition Automatic Purge
Twenty (20) minutes after the control has shut off, the blower
will start again for a two-minute purge cycle that dries the air
channel. Note that the LCD display will read “PURGE” and
begin to countdown the 10 or 20 minute pause before the purge
cycle begins. The readout will display “PURGE ON” during
the purge cycle. Any time during the pause before the purge
cycle begins, pressing and holding the Blower Speeds icon
will reduce the pause from 20 minutes to 10 minutes. During
the two-minute purge, pressing the “Blower On/Off” icon will
stop the purge.
Signature Edition Daily Purge
The daily purge can be activated through the customized
settings of the Signature Edition touchpad. When activated, the
daily purge will start the blower for two-minutes at the same
time every day to dry the air channel. See “Operating The
Signature Edition MicroSilk
®
-AirMasseur
®
Touchpad” section
for details on activating this setting.
