-
8
-
Connecting to AC Power
Check to make sure your Jasmine LP4.0 has been settled for
operation at your local AC voltage mode. Attempting to use
your Jasmine LP4.0 at any voltage other than that showed on
the rear panel of the LP4.0 power unit may cause damage
that is not covered by Jasmine’s warranty.
Jasmine AC Power Mode:
The 230V mode is suitable for using in 210 ~ 240V voltage
environment.
The 115V mode is suitable for using in 100 ~ 130V voltage
environment.
Connecting to Turntable
Generally, When you connect the signal output cable of your
turntable to the input connector of Jasmine LP4.0, Please be
sure that the ground spade of the signal cable also be
connected on the ground terminal of Jasmine LP4.0 at same
time. Otherwise, maybe cause continuous background noise
coming with music.
But, if your turntable already directly grounded through the
AC power cable of your turntable, please leave the ground
spade free.
Connecting to Amplifiers
The output of Jasmine LP4.0 can be directly connected to
pre-amplifier or integrated amplifier.
Because LP4.0 has no the volume control function , so don’t
directly connect the LP4.0 output to any power amplifier, too
large volume maybe burn down your speakers.
