Connections _______________________
This section provides instructions to connect the Jasmine LP1.0
Phono Pre-Amplifier to the rest of your music system. Below is
an illustration of the Jasmine Phono Pre-Amplifier rear panel,
showing all inputs and outputs.
Input Output Power Switch AC Inlet
Ground MC/MM Mode Selector Gain Selector
Avoid allowing static shocks to be applied to the inputs or
outputs. To prevent static shocks, touch any grounded surface,
such as the chassis of a component that is plugged into an AC
socket, before connecting or removing a cable.
Inputs and outputs can be safely connected to the Jasmine LP1.0
Phono Pre-Amplifier when the AC power is switched off.
Check to make sure your Jasmine LP1.0 Phono Pre-Amplifier
has been manufactured for operation at your AC line voltage.
Attempting to use your Jasmine LP1.0 Phono Pre-Amplifier at
any voltage other than that specified on the rear of the unit may
cause damage that is not covered by Jasmine’s warranty.
Jasmine AC Power Mode:
The 220V mode is suitable for using in 220 ~ 240V voltage
environment.
The 120V mode is suitable for using in 110 ~ 120V voltage
environment.
Connecting to AC Power