Avoid allowing static shocks to be applied to the inputs or
outputs. To prevent static shocks, touch any grounded surface,
such as the chassis of a component that is plugged into an AC
socket, before connecting or removing a cable.
Inputs and outputs can be safely connected to the Jasmine BL-I
when the AC power is switched off.
Before pluging in the AC Power, please make sure the power
model switcher of your BL-I was settled at right position!
Attempting to use your Jasmine BL-I at any voltage other than
that specified on the rear of the unit may cause damage that is
not covered by Jasmine’s warranty.
Jasmine AC Power Mode:
The 230V mode is suitable for using in 215 ~ 245V voltage
environment.
The 115V mode is suitable for using in 100 ~ 130V voltage
environment.
Break-in and warm-up
Careful listeners will notice that the sound of the Jasmine BL-I
improves steadily after the unit is powered-up. A new unit will
undergo more dramatic changes when power is applied for the
first time. Depending on the resolution of the system and the
attentiveness of the listener, you may find that the sound
continues to improve over the first several weeks of operation.
If the power is disconnected for a period of an hour or more, the
unit will undergo similar but less dramatic break-in.
Jasmine BL-I own three signal input channels:
-
Wireless Bluetooth Lossless
-
Optical SPDIF digital audio
-
Coaxial SPDIF digital audio
Jamsine BL-I not only a bluetooth lossless audio receiver, it also
can be used as a DAC, Its DAC sample rate is up to
24bit/96KHz.
Please find the 2.4G antenna in the accessories coming with
Connecting to AC Power
Connecting to Cables and Antenna
