JASION EB7, Руководство пользователя, Страница: 8 / 22

1. Remove the headlight moun�ng bolt from the fork
arch and set aside.
3. Use a Allen wrench at the bolt head and �ghten
partway.
4. Plug in the headlight. Locate the two sides of the
orange, three-pin headlight connector, carefully align
the internal pins and notches and external arrows,
then press directly together without twis�ng to fully
seat the connec�on.
2. A�ach the headlight to the fork arch. Pass the
headlight moun�ng bolt through a washer, the
headlight mount, the fork arch moun�ng point,
and thread the locknut onto the bolt end.
Assembly
Assembly
For be�er pedaling, safety and overall riding comfort, posi�oning the seat at the right height is important. The rider's
leg length is used to determine the seat's posi�on. When you pedal, your hips should remain level and your legs should
be almost fully extended at the bo�om o�he pedal stroke, but not over-extended.
To determine the right seat height, sit on the E-bike with one pedal at its lowest point and place the ball of your foot on
the pedal. Your leg should be almost fully extended(not lockedout) with a slight bend at the knee.
Move the seat up and down by sliding the seatpost
in or out of the seat tube. DO NOT raise the seatpost
beyond the minimum inser�on marking etched into
the seatpost tube.
Open the quick release lever by swinging the
lever open and outward fully.
Adujst the seat and the head of the seat is
parallel with the top tube.
Close the quick release lever using your palm or finger.
11
12