Jasic TIG Series, Руководство по сборке

Страница: 7 / 8

7
ASSEMBLY
8 Remove the top brackets shown with item 2 9 Mount the top shelf (item 2) on top of the
and fit to the top of the power source as shown fitted brackets and use the screws removed
below. Use the screws you have removed from earlier to fix the top shelf in place. Also secure
the power source lid to fix the two brackets in the top shelf (item 2) to the cylinder upright
place.
(item 3) with screws (A).
10. Fix (item 6) which assists holding the TIG wire in place, to the top panel (item 2) as shown below using
two screws ©, a 7mm spanner may be required to assist
with fastening this accessory in place.
11. Fit the supplied bottle chains (as shown below) through
the relevant slots on item 3 and the assembly is now
complete.
12. Connect the water cooler power plug to the control socket on the rear panel of the TIG power source.
13. Check the relevant TIG machine operating manual for instructions for fitting a water cooled TIG torch.