background image

Your new product

Thank you for selecting this Jasic Technology, Wilkinson Star product.

This product manual has been designed to ensure that you get the most from your new product. Please ensure that you are fully 
conversant with the information provided paying particular attention to the safety precautions. The information will help protect 
yourself and others against the potential hazards that you may come across.

Please ensure that you carry out daily and periodic maintenance checks to ensure years of reliable and trouble free operation.

Wilkinson Star Limited are a leading supplier of equipment in the UK and our products are supported by our extensive service 
network. Call your distributor in the unlikely event of a problem occurring. Please record below the details from your product as 
these  will  be  required  for  warranty  purposes  and  to  ensure  you  get  the  correct  information  should  you  require  assistance  or 
spare parts.

Date purchased

 

_____________________________________________________

From where 

   

_____________________________________________________

Serial Number

 

_____________________________________________________

(The serial number will normally be located on the equipment data plate on the underside of the machine or on the rear panel)

Please note products are subject to continual development and may be subject to change without notice

i

Содержание MIG SERIES



















Отзывы: