Controls
4
Front view
1.
Over current LED
2.
Low voltage LED: LED on indicates that the
input voltage is low.
3.
Digital ammeter.
4.
Current control knob
5.
Arc force control
6.
"+" Output terminal: To connect the electrode
holder.
7.
Remote control socket.
8.
"-" Output terminal: To connect the work clamp.
9
Hot start ignition control
10
Local / remote switch
11
Digital voltmeter
12
Overheating LED on indicates that the temperature inside the machine is too high
and the machine is under overheating
protection status.
Rear view
13
Mains input cable gland
14
Data plate
15
Mains switch
7
