5
3. Place the RF receiver and
the mouse in the proper
location for your com-
puter.
Place the receiver at least 8
inches (20 cm) from electrical
devices such as the computer
or monitor.
4. Turn on the computer. If your OS is Windows 98, the Add New Hardware
Wizard starts. Insert your Windows 98 CD into the CD-ROM drive. Fol-
low the instructions on the screen. Use the <Tab> key to move among
items on the screen and press <Enter> to make selections. If the OS is
Windows ME/2000/XP, the USB driver is installed automatically.
5. Use a bent paper clip to
press the RF receiver con-
nect button (
A
), and then
press the mouse connect
button (
B
).
Note! Repeat Step 5 when con-
necting the RF Optical Mouse
for the first time and after re-
placing the batteries.
Ensure that the mouse is working. If the cursor does not respond to
mouse movement, repeat Step 5 to ensure that a connection has been
made. If it still is not working, refer to the Troubleshooting section at the
end of this guide.
Note! The Wireless Optical Mouse has an 800-dpi sensor, which makes cur-
sor sensitivity exceptionally high. If you are browsing the Web and
make a selection with the right mouse button while accidentally mov-
ing the cursor, the selection will not be made. Ensure that you hold
the cursor steady while making selections.
Connect switches
A
B
8 inches
Note! You can also press the receiver
connect switch (A) to awaken the
computer from suspend mode.
Содержание AGM-9300
Страница 1: ...AGM 9300 Wireless Optical Mouse Instruction Manual...
Страница 2: ......