Mouse Installation
Please keep these directions in a safe place.
1) Slide the USB receiver out of the bottom of the mouse.
2) Insert the USB receiver into an available USB port
3) Squeeze the “Connect” button on the receiver and hold for
three seconds; a red light will begin flashing.
4) Push the “Connect” button on the bottom of the mouse.
This will ensure the mouse and receiver are properly
paired together.
Storing the receiver
To help conserve batteries and enhance portability, the USB nano
receiver is designed to store inside the mouse. To do this, simply
unplug the receiver from your USB port and slide it into the
compartment underneath the mouse. Once the receiver is in
place, the power will automatically shut off.
Trouble Shooting
• Mouse does not work properly
-Check that your batteries are in the mouse properly.
• Reconnect your mouse to the receiver.
-Press the link button on the receiver. Press the link button on
the bottom of your mouse.
• Mouse does not move on screen
-Reconnect your mouse to the receiver.
-Change the batteries in your mouse.
-Make sure that your USB receiver is fully plugged into your
USB port.
