pg. 6
(4) Press and release the right side (ON) of the Group/Scene button (1, 2, 3 or 4) that you wish to
assign the device to. The Orange LED will start blinking.
(5) Press and release the button on the device you wish to add.
(6) The Orange LED will stop blinking and the Green LED will blink twice to show that you have
successfully added the device to a group.
Creating or adding a device to a Scene
Since this is a secondary controller, it cannot add a new device to the network, but it can add a network
device to a scene.
The network information must be copied to this device before trying to create or
modify a Scene.
(1) Press and hold the Add button and Remove buttons at the same time until the Orange LED blinks
twice, then release.
(2) Press and release the Add button.
(3) Press and release the Scene button.
(4) Press and release the right side (ON) of the Group/Scene button (1, 2, 3 or 4) that you want to
assign the device to. The Orange LED will start blinking.
(5) Press and release the button on the device you wish to add.
(6) The Orange LED will stop blinking and the Red LED will turn ON. The controller is waiting for you
to perform the next step.
(7) Adjust the brightness level on the device.
(8) Press and release the Add button. The Red LED will turn OFF.
(9) The Green LED will blink twice to show that you have successfully added a device to a scene.
Please note: On/Off only lighting devices can be added to scenes in either On or Off mode so
as an example, the same light could be ON in scene 1 and Off in scene 2. Step 7 above is
skipped when adding an On/Off only device to a scene.
Removing a device from a Group or Scene
Note: This process is the same for Groups and Scenes. The only difference is which button
you press in step 3.
(1) Press and hold Add button and Remove buttons at the same time until the Orange LED blinks
twice, then release.
(2) Press and release the Remove button.
(3) Press and release the Group or Scene button.
(4) Press and release the right side (ON) of the button that controls the group or scene (1, 2, 3 or 4)
from which you want to remove the device
(5) Press and release the button on the device you wish to remove.
(6) The Orange LED will stop blinking and Green LED will blink twice to show that you have
successfully removed a device from a group.
Controlling your devices
This device can control both Groups and Scenes. Use the Group and Scene buttons to select the
mode you want to control.
This controller will stay in that mode until the other mode is selected.
(1) Press and release the Group or Scene button. The controller will enter that control mode and
the amber LED behind group/scene button #1 will blink once. There may be a brief delay
