safety messages to employer
and safety director
page 2 of 8
Model PFI--1
PRODUCTS CORPORATION
33 ANDERSON ROAD, MIDDLETOWN, CONNECTICUT 06457--4926
UNITED STATES OF AMERICA E--Mail [email protected]
TEL. 860--347--7271 FAX. 860--347--6978 WWW.jarvisproducts.com
®
JARVIS
6223015::.
1. Ensure
that all employees who use this tool are trained in the proper use of this tool and are aware of
the dangers that may arise if they do not follow procedures outlined in this brochure.
2. Enclosed
are four (4) copies of
“NOTICE TO OPERATORS, MAINTENANCE AND CLEANUP PER-
SONNEL.”
Post one copy on the employees’ bulletin board; give one copy to the operator(s); give one
copy to the maintenance foreman; and give one copy to the sub--contract cleanup / internal cleanup fore-
man.
Additional copies will be provided upon request.
3.
The tool is designed and intended to be powerful. This fact should be obvious to your employees, but
you must emphasize it to them.
4. Ensure
that proper procedures are established (in accordance with OSHA’s lockout/tagout procedures
29 CFR 1910.147) to prevent accidental startup or release of stored energy.
5. Remove
and
repair
any tool that malfunctions.
All
personnel must be instructed to remove any mal-
functioning equipment.
6. Never
make modifications or alterations to the tool.
Replace any missing or illegible labels.
7. Follow
our installation and maintenance instructions for proper installation and care of the tool.
8. Avoid
injury. Do not permit the tool to be misused.
9. If
you
resell
or
distribute
a Jarvis product, you must provide the purchaser with the appropriate safety
sheets and tool brochure.
Additional copies of safety sheets and tool brochures will be provided upon
request.
SAFETY MESSAGES TO EMPLOYER AND SAFETY DIRECTOR
AVOID INJURY
